- Optical cables
- Mounting cables "twisted pair"
- Control cables
- Universal cables
- Installation wires and cables
- Universal Power Cables
- Cables for fire and security alarm
- Telephone cables
Universal cable (installation, control, telecommunication) for industrial data networks
МКЭКШВ (нг(A), нг(A)-LS) (armored) and МКЭШВ (нг(A), нг(A)-LS) (unarmored)
manufactured acc. to ТУ 3581-006-76960731-2006
Products are manufactured in accordance with the requirements of ISO 9001 quality system.
Application
МКЭКШВ, МКЭКШВнг(A), МКЭКШВнг(A)-LS and МКЭШВ, МКЭШВнг(A), МКЭШВнг(A)-LS cable series is designed according to special requirements and used for digital fieldbuses, connecting frequency-modulated digital sensors, and 4-20 mA sensors through HART or RS-485 interfaces. Cable series includes twisted pair cabling that features colour marked conductors with collective or paired shielding. Wire armour is available only for МКЭКШВ (нг(A), нг(A)-LS) cables. The cables are designed for fixed installation indoors and outdoors, in cable ducts and in the ground, as well as in IIVT4 explosion-hazardous areas. The cables are optimized for a rated AC voltage of up to 500V (400Hz), and DC voltage of up to 750V, with operating temperature ranging from -50°C to 50°C. They also can be used in any climatic region, including tropics.
Cable design
- Twisted pair lay - maximum 80 mm
- Conductor - stranded copper, tinned, Class 3 flexibility according to GOST 22483-77 standard
- Conductor insulation - Colour marked PVC compound
- Shield - paired (tinned copper wire braid) or common ((tinned - on request) copper wire braid)
- Armour - The armor (МКЭКШВ (нг(A), нг(A)-LS)) is made of galvanized steel wire, which provides enhanced flexibility if compared to the tape armoured cables (Cable bending radius - 10D, where D is outer cable diameter)
- Outer sheath - PVC
Electrical characteristics* |
Parameter value depending on conductor cross-section |
||||
0,5 mm2 |
0,75 mm2 |
1,0 mm2 |
|||
DC conductor resistance, (Ω/km) |
≤ 40,7 |
≤ 26,0 |
≤ 22,3 |
||
Twisted pair capacity, (nF/km) at 1 kHz at 256 kHz |
108 |
120 |
130 104 |
||
Attenuation rate (dB/km) at 4 kHz at 0,1 MHz at 1 MHz |
8,10 35,0 |
8,00 34,0 |
1,66 6,70 33,0 |
||
Wave resistance (Ω/km) in the range of |
|
|
|
||
* According to these parameters the cable meets characteristics of the foreign counterparts |
* This parameter is required for design calculations of buildings, structures, and premises that are equipped with counter ceilings.